ILD 300

Catalogue code: 4.04
Loop driver up to 400m2
Ampetronic Ltd., Unit 2, Trentside Business Village, Farndon Road, Newark, United Kingdom
Brief description
Perimeter installation suitable for Theatres, Sport halls, Education enviroments, places of worship, lecture Halls
Recommended area covered by this driver
compatible connectors
Own experiences, UNB experts, Equalizent experts, Racio experts
very good listening (stereo) with hearing aids T
Experiences of UNB clients, Equalizent clients, Racio clients
Institution should invest to this amplifier amost everywhere, they can profit from increased attendance or can benefit from new custumer
More informations
Supplier for the Czech Republic, Austria and Slovenia
Unie neslyšících Brno sociální podnik s.r.o., Palackého třída, 114, Brno tel:541245321,mob:725605216, email: polacek@pomuckyproneslysici.cz
Comparing with other similar products
This equipment is favourite at middle size theathre - up to cca 50 people
Meeting room
Seminar room
Private homes
Receptions and waiting rooms

Power 35W 230V AC nominal, 45-65 Hz , Power switch and LED indicator on front panel
Microphone  Programmable between microphone and line via panel menu
Microphone / Microphone specification; 200 - 600Ω, sensitivity -64dBu.
Line Selectable 12V phantom power on microphone only
Line sensitivity; -39dBu
Input 2 can also be used for AES3 Digital Audio Signals
Slave In 6.35mm jack socket for linking more than one amplifier.
Inserting plug disables other inputs
Loop Output Drive Voltage 33.9VRMS (48Vpk) at maximum output current per channel
Loop Output/Drive Current D10-X 
• 10ARMS (14.1Apk) up to 60 seconds continuous 1kHz sine wave, peak >14.1A per channel
• Cont. pink noise 4.7ARMS short term peaks >14.1A per ch.
Slave Out 6.35mm jack socket to connect to other slave amplifiers
Loop Connectors Neutrik NL2 Speakons (supplied) for each output
Loop Monitor Provides access to monitor actual loop current via a 3.5mm stereo headphone connector on front panel, Channel A on left, channel B on right.
DC Output Resettable, fuse protected 12V 0.1A. Operation can be configured via menu
Frequency Response 80Hz to 6.5kHz
Distortion THD+N <0.2% 1kHz sine at full current
Automatic Gain Control The AGC is optimised for speech. Dynamic range >36dB
Metal Loss Correction Corrects system frequency response due to metal structures in a building. Frequency to be set via the menu.Gain constant at 1kHz, adjustable gain slope from 0 to 4dB per octave in 0.25dB increments. Custom 2 slope MLC allows different slopes and transition 
Phase Shift User selectable at 0° or 90° between outputs